You're Psyched!  Your "GO BIG" PosterMeUp.com Product Has Arrived.

1)  Get another person.  The 48" "GO BIG" Product is installed much easier with another set of hands!

 

2) Locate a place to place the "GO BIG" Product.

 

 "GO BIG" Sticks to: Will NOT Stick To.
Painted Drywall Unpainted Drywall
Metal Textured walls or textured wallpaper
Plexi glass Textured or porous paneling
Glass Brick
Most Wall Paper Dirty surfaces
   
* Wait 30 days after painting before applying your "GO BIG" Product to the surface
* "GO BIG" Product comes with a TEST Product which should be applied prior to the "GO BIG" product to ensure desired results.
* High end paints (washable) - Sherwin Williams Duration do not work well with the "GO BIG" product
* If a permanent solutions is desired PosterMeUp.com can apply a stronger adhesive to the product for desired results.

 

3) Measure the location to ensure the "GO BIG" Product will fit!

 

4) A Clean Surface is Important - A warm damp cloth will work well.  Do not use cleaning agents or soaps.   LET IT DRY COMPLETELY!

 

5) Peel and Stick - First unroll the "GO BIG" Decal and lay it flat.  A good idea is to unroll me upside down and slightly weight the corners.  Let the "GO BIG" Product relax.  Now... With someone on the other side peel the graphic GENTLY!  Peel from one starting point to the other (Example:  Top to bottom, side to side, bottom to top, etc.)  Then apply it to the wall.  Watch out for air bubbles during application of the "GO BIG" product.  If you make a mistake peel carefully and reposition. (* Note - be careful not to stick the "GO BIG" Product to itself.  It will peel back apart but it will be difficult and damage may occur.)   Carefully laying the product to the wall seems to work well but remember it always depends on the exact image you are applying to the wall.

 

6) Smooth Out the "GO BIG" Product.  You may use a towel, cloth, squeegee to smooth out the bubbles although bubbles are typically address during the peel and stick process.  Make sure you cover/press the entire product to the surface/wall.  Make sure you get the edges as well.

 

7) Admire your "GO BIG" product with your family and friends!